Basic requirements for Material and Flange |
Requirements are valid for normal situation, in special you have to contact us to introduce. |
Material |
Test basis / Requirements |
Delivery Condition |
| C 22.8 (1.0460) |
DIN 17243: 01.87 + VdTUEV - WB 350/3: 2009
DIN 17243: 01.87
VdTÜV - WB 350/3: 2009 |
+N |
| P250GH (1.0460) |
DIN EN 10222-2: 04.2000
National Annex |
+N |
| P245GH (1.0352) |
EN 10222-2:1999-12 + AC : 2000-02 |
+N |
| A105N / C21 |
ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04
+ VdTUEV399/3: 1996-09
+ NACE MR 0175: 2000 |
+N |
| A105N |
ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04
+ NACE MR 0175: 2000 |
+N |
| C21 (1.0432) |
VdTUEV - WB 399/3: 1996-09 |
+N |
| RSt 37-2 (1.0038) |
DIN 17100: 1980-01 |
+N |
| S235JR (1.0038) |
DIN EN10025-2: 2005-04 |
+N |
| 16Mo3 (1.5415) |
DIN EN10222-2:1999-12 + AC:2000-02 |
+N |
WStE355 / TStE355
(1.0565 / 1.0566) |
DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06 |
+N or QT |
| P355NH (1.0565) |
DIN EN10222-4: 1998 + A1: 2002-12 |
+N |
WStE355 / P355NH
(1.0565) |
DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
+ DIN EN10222-4: 1998 + A1: 2002-12
+ DIN EN17103 :1989-10
+ DIN EN10222-4: 1998 + A1: 2002-12 |
+N or QT |
| 1.4301 (X5CrNi17-10) |
DIN EN10222-5: 2000-02 |
+AT |
| 1.4306 (X2CrNi19-11) |
DIN 17440:1996-09 |
+AT |
| 1.4401 (X5CrNiMo17-12-2) |
DIN EN10222-5: 2000-02 |
+AT |
| 1.4404 (X2CrNiMo17-12-2) |
DIN EN10222-5: 2000-02 |
+AT |
1.4432 (X2CrNiMo17-12-3)
|
DIN EN10222-5: 2000-02
|
+AT
|
1.4541 (X6CrNiTi18-10)
|
DIN EN10222-5: 2000-02
|
+AT
|
1.4571 (X6CrNiMoTi17-12-2)
|
DIN EN10222-5: 2000-02
|
+AT
|
1.4541 / F321
|
DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
|
+AT
|
| 1.4571 / F316Ti |
DIN EN10222-5: 2000-02 / +ASTM A 240 |
+AT |
1.4404 / F316L
|
DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
|
+AT
|
1.4306 / F304L
|
DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005
|
+AT
|
| 1.4307 / F304L |
DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005 |
+AT |
Flange |
Test basis / Requirements |
DIN, Carbon Steel
|
DIN2519:1991-06
+ AD2000-W9: 02.04; -W13/ TRD107;TRB100;
+ Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 |
DIN, corrosion-resistant Steel
|
DIN2519:1991-06
+ AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100;
+ Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 |
DIN EN 1092-1, Carbon Steel
|
DIN EN 1092-1: 2008-09
+ AD2000-W9; -W13/TRD107;TRB100
+ Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 |
DIN EN 1092-1, Stainless Steel
|
DIN EN 1092-1: 2008-09
+ AD2000-W9; -W2; -W10/ TRD107; TRB100
+ Directive 97/23/EG Annex I, Chap. 4.3: 1998-02 |
| ANSI |
ASME B16.5:2003
ASME B16.47:2006 |
Basic requirements for Material and Fitting |
Requirements are valid for normal case, in special case you have to contact the technical department. |
Material |
Test basis / Requirements |
Delivery Condition |
| 1.4541 (X6CrNiTi18-10) |
DIN 17458:1996-09 |
+AT |
| 1.4571 (X6CrNiMoTi17-12-2) |
DIN 17458:1996-09 |
+AT |
Fittings |
Test basis / Requirements |
DIN2609 Stainless Steel
|
VdTUEV –MB 1252/ AD2000- W2; W10/TRD107;TRB100 |
| T-Piece |
Directive 97/23/EG Annex I, Chap. 4.3:1998-02 |
| Bow |
DIN2615-1 |
| Reducer |
DIN2605-1
DIN2616-1 |
Company QQ
WhatsApp
+8613969085317
WeChat
